|
|
| DF-50 |
|
Enhance
the "look" of your lighting the safe, economical way by using the
standard of the industry for creating haze effects. Originally
developed for the movie sets of Hollywood, the DF-50 produces a fine haze effect with a droplet size of 1 micron or less. It
operates without any modification using either of two fully tested and
approved fluid types: a traditional mineral oil-based fluid; or a new,
water-soluble glycol-based fluid. The oil-based fluid is a food grade
highly refined white mineral oil, which means that it's odorless,
non-toxic, environmentally safe, and fully compliant with US Food
& Drug Administration regulations.
|
| A recent report commissioned by
Actors' Equity Association & the League of American Theatres
and Producers, and prepared by the Mt. Sinai School of Medicine and the
ENVIRON Int. Corp., established exposure guidelines for Actors Equity
productions. The results of the test show that no other machine
outperforms the DF-50 in meeting health and safety
guidelines. The DF-50 is patented, lightweight,
compact, runs without any warm up and is tested and approved by the
State of California Occupational Safety and Health Act Regulations
Department, as well as Actors Equity and other professional
organizations. |
| Features: |
- On/Off
switch or DMX 512
- Brushless,
AC, Ball bearing, 1+ Horsepower Motor
- Compressor:
5-year parts and labor.
- All
other components: One year parts and labor
|
| Safety Testing: |
- CAL-OSHA
- League of American
Theatres
- Actors Equity
- CE Approved
|
| Operating
Voltage: |
- 110
- 125v /4 amp or 220v/2.0 (50-60) cycle
|
| Dimensions: |
- 14"H x
15"L x 8"W (35x38x21
cm)
- 35 lbs
(16 KG)
|
|
With
a 2-liter tank capacity and an astoundingly low fluid usage the run
time on one tank of oil-based fluid is approximately 35 hours! It's
easy to use, easy to store and easy to maintain, plus the compressor
(which is the magic ingredient that "cracks" the oil) comes with a
5-year warranty.
DIFFUSION(tm) haze is totally odorless and can only
be detected visually. No sore throats, funny smells, or burning eyes
and created with no heat, so no warm up period is required. Fog Hang
Time is over 3 hours in an enclosed space. Haze fluid is odorless and
leaves no residue when used properly.
Now available in a version supporting control via DMX512. Optional
Accessories include: remote control road case, traveling road case,
auto-timer, and auto-fill.
|
|
| Reel
EFX Fan II Turbo |
|
The
RE Fan II Turbo incorporates a brand new turbo blade design and features an adjustable
speed control and a one touch ‘blast’ button.
However, what makes the RE Fan II Turbo different is the unique design
that allows you to adjust the beam focus of the unit. Now you can go
from a focused channel of wind to a wide flood at the touch of a dial.
Totally variable from 10° to 45°, the beam of the RE
Fan II Turbo has a maximum velocity of 22 miles per hour at a distance
of 10 feet, whilst drawing only 2 Amps electrical current, at 200-240
Volts, 4 Amps at 100-120 Volts. The RE Fan II Turbo comes supplied with
its own mounting yoke, which can be floor mounted or attached to a
stand. The yoke also surrounds the unit for protection during
transportation.
|
| Features: |
- Brushless,
AC, Ball bearing Motor
- Solid
state speed control, once touch blast
- Peak
Velocity: 22 MPH at 10 ft. (Focused Beam)
- Flood:
45 degrees (8ft. beam at 10 ft.)
|
| Specifications: |
- 14" L x 19" W x 22" H
- 23 lbs
|
| Operating
Voltage: |
- 110-125v
/ 4 Amp or 220v / 2 Amp (50-60) cycle
|
| Warranty: |
- One year parts and labor
- Lifetime
warranty on housing
- OSHA
compliant, CE Approved
|
|
| Reel
EFX Fan VI |
|
New
16" blade
Twice
the blade of area of RE VI Fan and 3 times the horsepower yielding an
exceptionally powerful fan.
Optional DMX remote control.
Uses advanced frequency synthesis speed control.
Quiet at low speeds. Glass filled front and back
grill. Unique reversed air flow design.
Motor mounts provide increased air straightening.
|
| Features: |
- Brushless,
AC, Ball bearing Motor
- Solid
state speed control, once touch blast
- Peak
Velocity: 22 MPH at 10 ft. (Focused Beam)
- Flood:
45 degrees (8ft. beam at 10 ft.)
|
| Specifications: |
- 14" L x 19" W x 22" H
- 23 lbs
|
| Operating
Voltage: |
- 110-125v
/ 4 Amp or 220v / 2 Amp (50-60) cycle
|
| Warranty: |
- One year parts and labor
- Lifetime
warranty on housing
- OSHA
compliant, CE Approved
|
|
| Skydancer
EFX Fan |
|
The
Skydancer EFX Fan is a great new innovation and allows you to add
fantastic audience interaction at rock and roll concerts, live events
and festivals, amusement parks, retail centers and a whole myriad of
other venues. Used in conjunction with AirTubular™ tube
shapes, dancing characters can be created and used for publicity with
incredible effect. The fan itself incorporates the same durable motor
that is used in the widely, and highly, acclaimed RE-Fan and is housed
in a unique hard polyethylene shell for protection. The material used
for the AirTubular™ tubes is fire retardant, reusable,
durable, and comes in a wide variety of colors and shapes. Designs of
the tubes allow you to create a whole crowd of "air people" who can
dance and move automatically, once connected to the Skydancer EFX fan.
Standard length tubes are 25 feet and can be customized to special
events with your own logo.
|
| Features: |
- Brushless,
AC, Ball bearing Motor
- Solid
state speed control, once touch blast
- Floor stand with
adjustable tilt
|
| Specifications: |
- 18" L x 20" W x 30" H
- 28 lbs
|
| Operating
Voltage: |
- 110-125v
/ 4 Amp or 220v / 2 Amp (50-60) cycle
|
| Warranty: |
- One year parts and labor
- Lifetime
warranty on housing
- OSHA
compliant, CE Approved
|
|
|
www.actlighting.com
