-------------------------------------- * Means something was changed/fixed + Means something was added - Means something was removed -------------------------------------- *********************************************************** * SOFTWARE RELEASE INFORMATION Version 6.500 * *********************************************************** * Exec Norm Mode: Copy Exe 1.11 thru 1.20 at 1.1 crashed. + NSP Comptibilty mode for NPU. * NDP Logfile issues * Shutting down the desk with an open PDA window crashed. * Presetbar Feature left side Popup was not updated. * Corrupted .sho files could crash at Startup. Now the sho files are deleted and ignored. * Presetbar Feature Popup is back. The new Popup at the left side shows Features from current Preset. *********************************************************** * SOFTWARE RELEASE INFORMATION Version 6.402 * *********************************************************** * DMX via Ethernet: 'Disabled if Standalone' did not work. Now not even a Standalone Master is sending. * OnPC did not show small Icons in Preset Buttons. *********************************************************** * SOFTWARE RELEASE INFORMATION Version 6.400 * *********************************************************** * Attribute Filter can scroll now. * Presetbar: Feature Popup shows only Features from actual Preset. * OnPC: FileServer Configuration could crash. * Downdating could crash. * Content / Tracking Sheets could crash after changing the selected Executor. * Random Chase in Network is working now. * Long Key Press when Desk is locked makes no more Action. * Autoscroll Sequence Sheet did not work with Links. + Added expansion chip in Compatibility Mode. + Cmdline Fade/Delay applies to active only. + 512 Attributes are available now. *********************************************************** * SOFTWARE RELEASE INFORMATION Version 6.300 * *********************************************************** + NSP 4 Portmode: Input is working. + DMX Input/Output: Streaming ACN is working. * Timecode Fader Event can be set to No Interpolation. * ETC Net2: CCL updated after Setup changes. *********************************************************** * SOFTWARE RELEASE INFORMATION Version 6.200 * *********************************************************** + Amount of Playback Master increased to 40 + 2Port Node: New 1.36 Software. Performance of the 2Port Node increased when running a lot of Parameters in a session * Entering long info texts for Cues does not crash the console any more *********************************************************** * SOFTWARE RELEASE INFORMATION Version 6.124 * *********************************************************** * Sequences with long names were not displayed right on Executor Buttons (Compatibility Mode) * Bitmap Paths for Gobos were not set correct (Compatibility Mode) * NSP Artnet Input: stopped when no chnages for long time. *********************************************************** * SOFTWARE RELEASE INFORMATION Version 6.123 * *********************************************************** + NSP can now be a 4Port Node for grandMA2. This must be configured at the NSP after updating to V6.123. Then configuration can be done with grandMA2. MainDisplay Line 1: 'XLR A Info' 4 sx 'XLR B INFO' MainDisplay Line 2: 'XLR C Info' Port 'XLR D INFO' x = Session Number XLR X Info: Mode:Universe x Mode can be: O: Output receiving Data Mode can be: o: Output not receiving Data Mode can be: I: Input sending Data Mode can be: i: Input not sending Data Mode can be: -: not active * 2Port Node: New 1.35 Software allows correct handling with grandMA2 *********************************************************** * SOFTWARE RELEASE INFORMATION Version 6.122 * *********************************************************** * 2Port Node: New 1.34 Software. Update to this software is needed to allow a connection between grandMA2 and 2Port Node * Channelset modes in Sequence Content and Tracking Sheet are now displayed independently from the sequence output state * Editing of running Bitmap Effects crashed the desk (Compatibility Mode) * Graphical editing of profiles did not display in and out values (Compatibility Mode) * The screen saver was not deactivated thru a fader push (Compatibility Mode) * Fader Wings work with motorfaders in compatibility mode. * deleted Executors did not drive down to zero level. * Remote Button Actions did not work when Desk is locked. * Edit Exec crashed at Page Move. + New display for executor buttons in compatibility mode + Times are displayed above Preset Time and Executor Time fader in compatibility mode *********************************************************** * SOFTWARE RELEASE INFORMATION Version 6.121 * *********************************************************** + The faderwing now works in compatibility mode for grandMA2 light or ultra-light as motorized fader extension * DMX Input and Timecode Inputs bug fixed * Artnet: no PollReply after config changes. * Artnet: PollReply with wrong IP. *********************************************************** * SOFTWARE RELEASE INFORMATION Version 6.120 * *********************************************************** Improved: .. New button executor assigment in series2 compatibility mode Bug fixes: .. MidiShowControl: SysexEnd Code was read as Page. *********************************************************** * SOFTWARE RELEASE INFORMATION Version 6.110 * *********************************************************** Attention: .. GEI Network Interface 1 GBit is forced to 100 MBit. Bug fixes: .. Console: Remotes for Micro and Pico .. Console: All but Fullsize: MSGXBOX and WINDOWS on All Screens crashed VxWorks. This is a bug years old, but unfortunately just now found. *********************************************************** * SOFTWARE RELEASE INFORMATION Version 6.100 * *********************************************************** Attention: .. A new streaming version! 6.1xx show files can't run in version 6.0xx Improved: .. 2Port Node: New 1.32 Software. .. onPC: install file has now the full Gobo library. Bug fixes: .. Console: after partial show read you lost used profiles in the patch. .. Console: copy cues in a network session can be wrong. .. Console: a Layout for dimmers has no output in Draw mode. .. Console: copy/move executor can crash the console. .. Console: Network Software Update between consoles sometimes fails. .. Network: better handling of session collisions. .. Network: ETC-Net2 protocol has missing DMX channels. Unparked DMX channels sometimes stays on. Please check your Node settings for unused channels! *********************************************************** * SOFTWARE RELEASE INFORMATION Version 6.000 * *********************************************************** Attention: .. A new streaming version! 6.0 show files can't run in version 5.9xx Improved: .. 2Port Node: New 1.25 Software. Bug fixes: .. Console: after partial show read you can't save a show file. .. Console: wrong attribute grouping when loading a "new show". .. PDA: the console crashes when you close some dialog boxes in different ways. .. Console: copy/move executor with page number didn't work. *********************************************************** * SOFTWARE RELEASE INFORMATION Version 5.920 * *********************************************************** Improved: .. Console: each desk with expansion chip WILL ( should not) replace a dummy NSP. Bug fixes: .. Console: Delete Cues in a Session cause wrong output. .. Console: CmdLine Exec Commands with given Page did call Fixed Execs. .. Console: Unparking of Multipatch Fixtures in a Session did not work. .. Console: Slave did not load Local User Profil Settings. .. Console: MIB und Cue Update works wrong. .. Console: PSR Pixelmapper datas missing. .. Console: AsciiShowImport ChannelNumbers higher 4096 did not work. .. Console: Backup Menu Dialog "USB internal & USB Device" was not present. .. Console: Layout Setup: moving a Selection let disappear unselected. .. OnPC: Timezone, Longitude and Latitude are adjustable now. .. diMA NDP: time send to console was wrong. Dimmer Network View optimized. .. 2Port Node: New 1.21 Software for 2 Port Nodes. DMX dropout during show upload. .. Network: MA Net packtes sometimes out of order in the Network -> spontaneously Show Upload. *********************************************************** * SOFTWARE RELEASE INFORMATION Version 5.910 * *********************************************************** NOTE: .. The UltraLight has 2048 Parameter now. .. New 2Port node software version 1.20. Bug fixes: .. OnPC: detected 2Port Nodes without a Session. .. 2Port Node: the DMX protocol from some consoles couldn't be read out. .. 2Port Node: DMX routing without a console session doesn't work. .. Partial Show Read: imported cuelist/cues with pink or orange Effects has wrong numbers. .. Partial Show Read: imported User Profiles has no View Button assignement. .. Console: a fast plug and remove of your USB device can terminate the access to the harddrive ide0. .. Console: When a desk running for a long time a Quikey operation could crash it. .. Console: a running random chaser with only 3 cues doesn't work random. .. Network: Sometimes not all Parameter available for Sniffer mode devices. .. Network: after you lost the Master in a Session there is a output delay on the ETCNet2 protocol. .. Midi Show Control: you can't fire Macros. *********************************************************** * SOFTWARE RELEASE INFORMATION Version 5.902 * *********************************************************** Bug fixes: .. Local DMX output made Problems during Show Load. .. NSP1 could stop working. *********************************************************** * SOFTWARE RELEASE INFORMATION Version 5.900 * *********************************************************** Improvements: .. New Option 'Theatrical Colours' : see seperate Release Information. .. Macros can now be assigned to Executors and will be executed ONLY local.(Cue links are global) .. Default Times: Goto / GO- are separeted now. .. Tools->MSC->MidiOut: SMPTE to Midi Time Code can be switched OFF. Bug fixes: .. Station leaving with Highlite On. .. Faders Page 3 up wasn't distributed in Network, when MSC .. First Exec Step called could be wrong .. Strand Shownet Configuration only partly saved .. Windows Station not ignored for valid Parameter Count. .. Copy multiple cues CueOnly. .. Programmer Undo sometimes not work .. Slave OutOfSync did not collect All Output( No NSPs ). .. Slave FixtureSheet could crash. .. fixed never shown OutFade/OutDelay in Programmer. .. fixed never shown Snap in Programmer and Tracking .. MSC not send wenn Cues fired by Slaves. .. PDA: Store Cue Box crashed. .. PDA: Delete Cue Box: No Cueonly Check. .. 2PortNode Version 1.17: DMX output active as long as session heart beat available. Better synchronization in dual-dmx-input mode Downgrade to software releases with version numbers below, default version blocked (version 1.15 lower boundary) .. Oopsing Deleted Cues in Network -> Crash. .. some Network issues mixing NSP1 and NSP2. .. PCI_SETTINGS.TXT is now in the Log Folder. added Memory Info. Will now be in any Crash Dump included. .. MIB: GO- with Time 0 did MIB again. Master Down and Up did MIB again. .. Added Basic OutDelay can be Basic InDelay. .. Effects called via Remote has been 1 Frame Out of Sync. .. Warning when Memory below 30 MBytes. .. MacroLine: Entering Time: Time X Time Y -> Fade X, Delay Y. Time X Time Time Y -> Fade X, Delay Y. Time Time Y -> Delay Y. Entering Time more then 2 times -> Fade. .. ShowNames: '\' was allowed. Shows could not be loaded. *********************************************************** * SOFTWARE RELEASE INFORMATION Version 5.831 [5830] * *********************************************************** .. FixtureTypes with more then 1 Dummy Parameter has been detected as Invalid. .. MIB did not work anymore, after Changes in Timing. *********************************************************** * SOFTWARE RELEASE INFORMATION Version 5.830 [5830] * *********************************************************** .. Invalid Parameter from OLD shows are detected and deleted. i.e. Virtual and Coarse Dimmer in 1 Fixture. If you get this Message in Setup stop ALL running Execs before Saving the Setup. .. Desk with PDA joining a Session could crash. .. LTP Masterfade fixed. .. Links in Network sometimes not executed. .. Unpark of MultipatchDummies did not work. .. Global USER_PROFILES in Sessions improved. .. FixtureCompactSheet scrolling did sometimes not work. .. MSC Set Command: num_l num_h val_l val_h. l (7 Bit) + h (7bit) gives a 14 Bit number. num 128 - 167 addresses ExecFader 1-40. val 0 - 16383 set Fader to 0-100%. .. FixtureCompactSheet with Filter Selected Sequ + AutoSort. .. NSP1 Problems with Network in General solved. .. better NSP Workload (including Network Traffic). .. Pico/Micro: Low Diskspace was not recognized. Could cause Crashes. .. PartialShowRead did not work for single Cues. .. Backup: Power Off did not create Backup. Power Off->Save->On: Showfiles not updated. .. Agenda: Can be stopped and started now in Agenda Dialog. .. MIB: if Dimmer has Modulator or Effect-> no more MIB. .. scrolling in CommandLine Window: History shown was often executed by accident. .. Effect Buttons did sometimes not show STOPPED effect.